Browse Firmwares

A full-band FM and AM receiver for Attaky Core, with touch tuning, live signal readouts, and optional Wi-Fi extras. FM/AM Radio turns Attaky Core plus the FM/AM Radio module into a full-band broadcast receiver with a large touchscreen and a high-performance receiver front end. Tune local broadcasts, save favourite stations, and read signal details from a clear on-device interface built for everyday listening and FM-DX exploration. Highlights Full-band FM and AM reception: Listen across the broadcast bands with a high-performance receiver front end. Touchscreen tuning: Enter a frequency, step through the band, and store favourite stations from a large, clear touchscreen. FM broadcast data: View RDS station name, radio text, and other available broadcast data where supported by the station. Live signal readouts: See signal strength, S-meter and dBµV readings, stereo or mono status, bandwidth, and tuning information. Optional Wi-Fi features: Use the on-device Wi-Fi setup portal to enable time sync and upstream community FM-DX tools when desired. Modular Attaky hardware: Run it on Attaky Core with the FM/AM Radio module, then add the battery module for portable listening. Tuning by touch Use the large touchscreen as the main tuner. Dial in a frequency directly, move through FM or AM in steps, and keep favourite stations close for quick return listening. The interface is built around clear frequency controls, so the radio can move between casual listening and precise tuning without extra equipment. Reading the signal FM/AM Radio shows more than audio. Live readouts display signal strength in S-meter and dBµV, stereo or mono status, bandwidth, and tuning information. On FM broadcasts with RDS, the screen can show station name, radio text, and other broadcast data when available. Optional Wi-Fi extras Network features are optional. The on-device Wi-Fi setup portal can enable time sync and upstream community FM-DX tools, including reception-spot submission, when configured. Leave Wi-Fi unconfigured and those network features stay off. Everyday controls The interface exposes practical radio and display settings for audio, RDS, FM and AM band behaviour, connectivity, FM-DX, auto memory, brightness, theme, language, clock display, screensaver, battery indication, signal-meter unit, and frequency font. The result is a receiver that can be adjusted for the way the broadcast sounds, the way the screen reads, and the way the radio is used. Compatibility FM/AM Radio requires Attaky Core paired with the FM/AM Radio module for reception. A bare Attaky Core can boot the app, but there is no tuner without the radio module installed. Add the battery module for portable use away from a fixed power source. Known limitations The upstream project serves the amateur-radio and FM-DX community, so some screens retain ham and DX terminology plus optional community tools such as reception-spot submission. Those network tools are optional and off unless configured. Full reception functionality requires the FM/AM Radio module. Upstream and license FM/AM Radio is a port by Attaky of the open-source project TEF6686_ESP32 by PE5PVB to Attaky modular hardware. The project is licensed GPL-3.0, and corresponding source is published per the license. Upstream authorship and the GPL-3.0 license are retained, with thanks to the upstream author. Install Install straight from the Attaky firmware store. Open this listing in your browser and flash it to your Attaky in one tap. There is nothing to download or install — the firmware store writes it to your device for you.

A focus timer for your Attaky that runs automatic focus and break cycles with a big countdown, a progress ring, colour cues, and optional sound cues. Pomodoro runs the classic focus-and-break rhythm on the Attaky Core: a focus stretch, a short break, and a longer break after several focuses, looping automatically. It gives the current segment a clear visual shape with an on-screen countdown, a progress ring, and a status light that changes by segment type. Highlights Automatic rhythm: focus stretches, short breaks, and long breaks loop for you. At-a-glance timer: a big countdown and progress ring show your place in the current segment. Colour status light: focus, short break, and long break each have their own colour, and the light blinks when a segment ends. Optional sound cues: add short tones at segment ends with the Media-IO / audio module. Touch-first control: drive the timer by touch, with physical keys as a full fallback. Configurable timing: set the focus, short-break, and long-break lengths and how many focuses lead to a long break — all stored on the device. Optional battery readout: add a battery readout with the battery module. Work in focused sprints Pomodoro handles the repeating rhythm for you: focus, short break, focus again, and then a longer break after several focus stretches. Once the cycle is running, the firmware loops through the focus and break pattern automatically, so each segment follows the same classic structure. See the current segment at a glance A big on-screen countdown shows the time remaining in the current segment, while the progress ring shows how far through that segment you are. Together, they make the current focus, short break, or long break clear without needing to interpret a complex screen. Follow the colour status light The status light gives each segment type its own colour: one for focus, one for short breaks, and one for long breaks. When a segment ends, the light blinks, giving you a clear visual cue that it is time to switch. Add sound when the module is fitted With the Media-IO / audio module fitted, Pomodoro plays a short tone at the end of each segment. Without that module, the firmware cleanly falls back to on-screen and status-light cues only. Use touch or physical keys Pomodoro is touch-first, so you can drive the timer by touch — and the physical keys are a full fallback, so nothing depends on the screen alone. Set the rhythm your way Set the focus length, short-break length, long-break length, and the number of focuses that lead to a long break. Pomodoro stores those settings on the device. Add a battery readout If the optional battery module is fitted, Pomodoro adds a battery readout. The timer itself needs only the Attaky Core, so the readout is a bonus when the module is present. Compatibility Pomodoro requires the Attaky Core. The Media-IO / audio module is optional and enables short end-of-segment tones, while the battery module is optional and adds a battery readout. Install Install straight from the Attaky firmware store — open this listing in your browser and flash it to your Attaky in one tap. There's nothing to download or install; the firmware store writes it to your device for you.

Your Core, reborn as a universal Bluetooth trackpad, keyboard and controller. Attaky Controller is a from-scratch firmware that turns the Attaky Core into a complete wireless control center. It pairs like any ordinary Bluetooth accessory and shows up as a standard keyboard, mouse and game controller — so it works with your computer, phone, tablet, smart TV or set-top box right away, with nothing to install on the host. Highlights Touchscreen trackpad — the Core's screen becomes a precision pointer: move, tap, double-tap and scroll. Keyboard + mouse + gamepad in one — a single composite Bluetooth HID connection. iPhone-compatible mode — works on iOS, where Bluetooth game controllers normally don't. Up to 10 devices — pair, name, switch, reconnect and re-pair, all from the device. Air-mouse — point at the screen by tilting the device. Battery-saving standby — dims and sleeps when idle (keeping the connection), with a deep "off" state to wake from. Safer reconnect — won't send input to a device until it's confirmed on reconnect. Optional Keyboard & Gamepad modules — full typing and real controller input. No companion app — everything is configured on the device itself. A trackpad in your hand The Core's capacitive touchscreen becomes a precision trackpad. Glide to move the pointer, tap and double-tap to click, and scroll smoothly. Make it yours from the on-screen settings — pointer sensitivity, scroll speed, natural (inverted) scrolling, pointer acceleration and double-tap behaviour. More ways to point and type The Core's D-pad sends arrow keys with SELECT as Enter — perfect for menus, slideshows and media apps. Turn on the air-mouse to move the cursor by tilting the device in the air, and pull up the on-screen symbol layer for punctuation and shortcuts a tap away. Built for many devices Pair up to 10 devices and give each its own Bluetooth name. The on-screen device list lets you switch the active device, reconnect a sleeping one, or re-pair a device that forgot its bond — in a tap, and without disturbing the others. Works everywhere A global iPhone-compatible mode reshapes the controller so iOS accepts it as a keyboard and mouse — no more "iPhone won't take a Bluetooth gamepad." Switch to Full-gamepad mode for a complete game controller on Android, Mac and PC. Keyboard and mouse work across every platform. Longer battery, safer reconnect The controller now saves power on its own: it dims and light-sleeps when idle while keeping the Bluetooth link alive, so it wakes the instant you touch it — and after a set time it can drop into a deep "off" state that powers the radio down, waking on a button press. Set the sleep timeout on the Display settings page. On reconnect, the controller holds its input until the device it's reconnecting to is confirmed, so a stray or unknown device can't receive your keystrokes or clicks. Grows with your modules Snap on the optional Keyboard module for full physical typing plus the on-screen symbol layer, or the Gamepad module for real game-controller buttons and sticks — all carried over the same single Bluetooth connection. On-device, by design A clean status screen shows the connected device and live battery level. Brightness adapts to the room with the built-in ambient-light sensor, or set it manually. Sensitivity, modules, device management, sleep timeout and Bluetooth mode are all configured right on the device — no companion app, no account. Compatibility Works as a standard Bluetooth Low Energy keyboard, mouse and game controller with iOS, Android, macOS, Windows, Linux and most smart-TV / set-top-box platforms. Requires the Attaky Core; the Keyboard and Gamepad modules are optional.