Browse Firmwares

Camillia is mesh radio firmware for twelve ESP32 boards. Ten named channels, direct messages, GPS, and a config UI you open in a browser — all of it running on the device, whether you drive it with a keyboard, a roller wheel, a trackball, or a touchscreen.

Off-grid messaging and location sharing over a long-range LoRa mesh — no cell signal, no internet, no fees. Meshtastic turns your Attaky Core + LoRa/GPS into a pocket-sized mesh communicator. Devices relay each other's traffic over long-range LoRa radio, so a group can exchange text messages and share location across open country with no cell network, no Wi-Fi and no subscription — ideal for hiking, events, the outdoors, and anywhere coverage runs out. Highlights Off-grid text messaging over a self-healing LoRa mesh — every device extends the others' range. Position sharing — GPS + BeiDou shares everyone's location across the mesh. Four-way screen orientation — landscape or portrait, normal or flipped, chosen right on the device; one firmware, remembered across reboots. One-button screen control — short-press the POWER button to sleep and wake the display. Clock without a phone — takes time from the mesh even before a GPS fix, or set the date, time and time zone by hand on-device. Long range, low power — reaches far beyond Wi-Fi/Bluetooth on a tiny power budget. Private, encrypted channels — AES-encrypted group chats. On-device messaging — read and send messages and browse nodes right on the screen. Optional keyboard module — type messages without reaching for a phone. Pairs with the Meshtastic apps — Bluetooth to iOS, Android and desktop. Talk where there's no signal LoRa is a long-range, low-power radio. Because every Attaky in range relays for the others, a handful of devices form a self-healing mesh that can blanket a trail, a worksite or an event — far beyond what one radio reaches, with no infrastructure to set up. Know where everyone is The built-in GPS (GPS + BeiDou) shares each node's position across the mesh, so you can see where your group is — distance and direction to every node, right on the device. For the full map view, open the paired Meshtastic app. Hold it your way Pick any of four screen orientations — landscape or portrait, either way up — straight from the on-device Settings. The choice is stored on the device and restored every boot, so the screen always matches how you carry it. A short press of the POWER button puts the display to sleep and wakes it again, and the device keeps time from the mesh even indoors, with a manual date, time and time-zone setting for when it is completely on its own. Standalone or with your phone Read and compose messages, browse the node list and check status right on the device's screen. Add the optional keyboard module to type comfortably, or pair over Bluetooth with the official Meshtastic apps (iOS, Android, desktop) for the full map, contacts and settings on a big screen. Screen orientation is set on the device itself. Built on Meshtastic This is the open-source Meshtastic firmware (meshtastic/firmware, 2.7.26), ported by Attaky to the Core + LoRa/GPS hardware with a keyboard overlay. Licensed under GPL-3.0; corresponding source is published per the license. With thanks to the Meshtastic project and its contributors. Meshtastic® is a registered trademark of Meshtastic LLC. This is a third-party Meshtastic Powered device and is not an official Meshtastic product. Compatibility Requires the Attaky Core + LoRa/GPS module. Optional: battery and keyboard modules. Interoperates with other Meshtastic devices and the official Meshtastic apps. Radio region/frequency follows your hardware's antenna. Install Install straight from the Attaky firmware store — open this listing in your browser and flash it to your Attaky in one tap. There's nothing to download or install; the firmware store writes it to your device for you.

A standalone touchscreen mesh communicator for the Attaky Mesh series. WadaMesh brings a full landscape touch interface to Attaky Mesh devices. Chat, contacts, channels, map, and settings run directly on the handheld, with MeshCore-protocol compatible LoRa communication, GPS positioning, battery telemetry, and optional hardware keyboard input. Highlights Full touchscreen interface puts chat, contacts, channels, map, and settings on the device itself. MeshCore-protocol compatible radio supports LoRa mesh communication for off-grid messaging. GPS positioning integrates location data into the mesh communicator experience. Battery telemetry reports device voltage when the power module is attached. Keyboard and touch input supports the optional Attaky keyboard module alongside the on-screen keyboard. Attaky Mesh bundle support covers Mesh Pocket, Mesh Deck, and Mesh Station. Touch-First Mesh UI The landscape LVGL interface is designed around direct interaction on the device. Move between chat, contacts, channels, map, and settings directly on the handheld. Chat, Contacts, Channels, and Map WadaMesh keeps the everyday communicator views on the handheld. Use the touch UI for conversations, contact browsing, channel management, map viewing, and device settings. Radio, Location, and Telemetry The Attaky port adds the Attaky Mesh series target with LoRa and GPS support for mesh communication and positioning. Battery telemetry adds device voltage reporting when the power module is present. Keyboard-Ready Input Mesh Deck users can use the integrated hardware keyboard, and the optional Attaky keyboard module can work alongside the on-screen keyboard for text entry. The keyboard module's symbol panel can summon on-screen keys for characters that are not on the physical layout. Install from the Attaky Firmware Store Install from the Attaky firmware store in your browser with one tap. The store handles the device install flow for this Attaky port. Upstream attribution WadaMesh is by ALLFATHER-BV and is distributed under the GPL-3.0-or-later license; this Attaky port is forked from upstream beta_47. Compatibility WadaMesh requires the Attaky Core and the LoRa + GPS expansion; the power module and the Attaky keyboard module are both optional.

Attaky Compatible firmware built on the open-source MeshCore project for Attaky Core, with Bluetooth app pairing, long-range LoRa, and GPS. This Attaky-built, MeshCore-compatible firmware turns the handheld with the LoRa + GPS expansion into a Bluetooth companion radio for the MeshCore phone app. The device handles radio, GPS, pairing, and quick status checks on its color screen, while messaging, contacts, and channels stay in the app. Highlights Bluetooth companion role pairs the Attaky device with the MeshCore phone app for conversations, contacts, channels, and configuration. Color status UI shows node name, radio parameters, Bluetooth pairing PIN, message count, and a recent-message preview. GPS position sharing sends location data from the LoRa + GPS expansion to the companion app. US and Canada radio defaults match the Attaky LoRa hardware while leaving the operating frequency adjustable from the app. D-pad navigation uses Select, Left, Right, and L1 for quick status-screen control. Optional battery reporting shows battery level when the power module is attached. Companion App Workflow This compatible build runs the Bluetooth companion role for the MeshCore app. The Attaky device runs the radio and presents a focused status interface, while the phone app provides the full messaging experience: chats, contacts, channels, and setup. Status at a Glance The on-device color UI is built for quick checks in the field. Use the controls to move through status screens for node identity, radio settings, pairing information, message count, and recent activity. GPS and Radio Setup With the LoRa + GPS expansion attached, the device supplies GPS position data to the MeshCore app and starts with LoRa defaults for the US and Canada region. Frequency remains adjustable at runtime from the app. Install from the Attaky Firmware Store Install this Attaky-compatible firmware from the Attaky firmware store in your browser with one tap. The store handles the device install flow for this Attaky build. Compatibility This firmware requires the Attaky Core and the LoRa + GPS expansion; the power module is optional and enables battery level. About this firmware This is third-party firmware built by Attaky for Attaky hardware. It is not an official MeshCore product and is not affiliated with, sponsored by, or endorsed by the MeshCore project. The MeshCore name is used only to identify the open-source firmware this Attaky-compatible build is built on and the MeshCore network and app it works with. MeshCore is by Scott Powell / rippleradios.com and is distributed under the MIT license; this Attaky firmware is forked from upstream v1.15.0.

A focus timer for your Attaky that runs automatic focus and break cycles with a big countdown, a progress ring, colour cues, and optional sound cues. Pomodoro runs the classic focus-and-break rhythm on the Attaky Core: a focus stretch, a short break, and a longer break after several focuses, looping automatically. It gives the current segment a clear visual shape with an on-screen countdown, a progress ring, and a status light that changes by segment type. Highlights Automatic rhythm: focus stretches, short breaks, and long breaks loop for you. At-a-glance timer: a big countdown and progress ring show your place in the current segment. Colour status light: focus, short break, and long break each have their own colour, and the light blinks when a segment ends. Optional sound cues: add short tones at segment ends with the Media-IO / audio module. Touch-first control: drive the timer by touch, with physical keys as a full fallback. Configurable timing: set the focus, short-break, and long-break lengths and how many focuses lead to a long break — all stored on the device. Optional battery readout: add a battery readout with the battery module. Work in focused sprints Pomodoro handles the repeating rhythm for you: focus, short break, focus again, and then a longer break after several focus stretches. Once the cycle is running, the firmware loops through the focus and break pattern automatically, so each segment follows the same classic structure. See the current segment at a glance A big on-screen countdown shows the time remaining in the current segment, while the progress ring shows how far through that segment you are. Together, they make the current focus, short break, or long break clear without needing to interpret a complex screen. Follow the colour status light The status light gives each segment type its own colour: one for focus, one for short breaks, and one for long breaks. When a segment ends, the light blinks, giving you a clear visual cue that it is time to switch. Add sound when the module is fitted With the Media-IO / audio module fitted, Pomodoro plays a short tone at the end of each segment. Without that module, the firmware cleanly falls back to on-screen and status-light cues only. Use touch or physical keys Pomodoro is touch-first, so you can drive the timer by touch — and the physical keys are a full fallback, so nothing depends on the screen alone. Set the rhythm your way Set the focus length, short-break length, long-break length, and the number of focuses that lead to a long break. Pomodoro stores those settings on the device. Add a battery readout If the optional battery module is fitted, Pomodoro adds a battery readout. The timer itself needs only the Attaky Core, so the readout is a bonus when the module is present. Compatibility Pomodoro requires the Attaky Core. The Media-IO / audio module is optional and enables short end-of-segment tones, while the battery module is optional and adds a battery readout. Install Install straight from the Attaky firmware store — open this listing in your browser and flash it to your Attaky in one tap. There's nothing to download or install; the firmware store writes it to your device for you.

Your Core, reborn as a universal Bluetooth trackpad, keyboard and controller. Attaky Controller is a from-scratch firmware that turns the Attaky Core into a complete wireless control center. It pairs like any ordinary Bluetooth accessory and shows up as a standard keyboard, mouse and game controller — so it works with your computer, phone, tablet, smart TV or set-top box right away, with nothing to install on the host. Highlights Touchscreen trackpad — the Core's screen becomes a precision pointer: move, tap, double-tap and scroll. Keyboard + mouse + gamepad in one — a single composite Bluetooth HID connection. iPhone-compatible mode — works on iOS, where Bluetooth game controllers normally don't. Up to 10 devices — pair, name, switch, reconnect and re-pair, all from the device. Air-mouse — point at the screen by tilting the device. Battery-saving standby — dims and sleeps when idle (keeping the connection), with a deep "off" state to wake from. Safer reconnect — won't send input to a device until it's confirmed on reconnect. Optional Keyboard & Gamepad modules — full typing and real controller input. No companion app — everything is configured on the device itself. A trackpad in your hand The Core's capacitive touchscreen becomes a precision trackpad. Glide to move the pointer, tap and double-tap to click, and scroll smoothly. Make it yours from the on-screen settings — pointer sensitivity, scroll speed, natural (inverted) scrolling, pointer acceleration and double-tap behaviour. More ways to point and type The Core's D-pad sends arrow keys with SELECT as Enter — perfect for menus, slideshows and media apps. Turn on the air-mouse to move the cursor by tilting the device in the air, and pull up the on-screen symbol layer for punctuation and shortcuts a tap away. Built for many devices Pair up to 10 devices and give each its own Bluetooth name. The on-screen device list lets you switch the active device, reconnect a sleeping one, or re-pair a device that forgot its bond — in a tap, and without disturbing the others. Works everywhere A global iPhone-compatible mode reshapes the controller so iOS accepts it as a keyboard and mouse — no more "iPhone won't take a Bluetooth gamepad." Switch to Full-gamepad mode for a complete game controller on Android, Mac and PC. Keyboard and mouse work across every platform. Longer battery, safer reconnect The controller now saves power on its own: it dims and light-sleeps when idle while keeping the Bluetooth link alive, so it wakes the instant you touch it — and after a set time it can drop into a deep "off" state that powers the radio down, waking on a button press. Set the sleep timeout on the Display settings page. On reconnect, the controller holds its input until the device it's reconnecting to is confirmed, so a stray or unknown device can't receive your keystrokes or clicks. Grows with your modules Snap on the optional Keyboard module for full physical typing plus the on-screen symbol layer, or the Gamepad module for real game-controller buttons and sticks — all carried over the same single Bluetooth connection. On-device, by design A clean status screen shows the connected device and live battery level. Brightness adapts to the room with the built-in ambient-light sensor, or set it manually. Sensitivity, modules, device management, sleep timeout and Bluetooth mode are all configured right on the device — no companion app, no account. Compatibility Works as a standard Bluetooth Low Energy keyboard, mouse and game controller with iOS, Android, macOS, Windows, Linux and most smart-TV / set-top-box platforms. Requires the Attaky Core; the Keyboard and Gamepad modules are optional.